How to Setup SNMP – DXS-3600-Series – D-View 7
Device and Software Used:
- DXS-3600-32S – FW: 2.40.046
- D-View7 – Version: 1.0.3.9
Note: Please always check our website for updates for firmware
Before commencing this setup, please check the following for D-View7 compatibility:
http://dview.dlink.com/models.php
Step 1 – Login to DXS-3600-32S
![DXS 3600 How to Setup SNMP](/in/en/-/media/faqs/uk/dxs/dxs-3600-how-to-setup-snmp0001.png)
Step 2 – Enable SNMP Global Settings
DXS-3600-32S > Management > SNMP > SNMP Global Settings
![DXS 3600 How to Setup SNMP](/in/en/-/media/faqs/uk/dxs/dxs-3600-how-to-setup-snmp0012.png)
Select the “Trap Settings” then click “Apply”
Step 3 – Enable SNMP Linkchange Trap Settings
DXS-3600-32S > Management > SNMP > SNMP Linkchange Trap Settings
![DXS 3600 How to Setup SNMP](/in/en/-/media/faqs/uk/dxs/dxs-3600-how-to-setup-snmp0014.png)
Click “Apply”
![DXS 3600 How to Setup SNMP](/in/en/-/media/faqs/uk/dxs/dxs-3600-how-to-setup-snmp0015.png)
You should see the above ports and “Traps” are “Enabled” – This will also depend on what ports you want to enable
Step 4 – Save configuration
Save > Save Configuration
![DXS 3600 How to Setup SNMP](/in/en/-/media/faqs/uk/dxs/dxs-3600-how-to-setup-snmp0017.png)
Click “Apply”
![DXS 3600 How to Setup SNMP](/in/en/-/media/faqs/uk/dxs/dxs-3600-how-to-setup-snmp0018.png)
Click “OK”
Step 5 – Login to D-View7
![DXS 3600 How to Setup SNMP](/in/en/-/media/faqs/uk/dxs/dxs-3600-how-to-setup-snmp0019.png)
Step 6 – Once you login, you may be presented with the following.
![DXS 3600 How to Setup SNMP](/in/en/-/media/faqs/uk/dxs/dxs-3600-how-to-setup-snmp0020.png)
Click “Later”
Step 7 – You should now be in “Dashboard” view – At the moment there will not be any “Managed Devices”
![DXS 3600 How to Setup SNMP](/in/en/-/media/faqs/uk/dxs/dxs-3600-how-to-setup-snmp0002.png)
To add a rule – Click on “Edit”
![DXS 3600 How to Setup SNMP](/in/en/-/media/faqs/uk/dxs/dxs-3600-how-to-setup-snmp0004.png)
Click “Add Rule”
Step 8 – Enter the probe settings for the device – In our example we are using the DXS-3600-32S (IP: 192.168.1.250). Note: You may also include a wide coverage of the network, for example: 192.168.1.1 – 192.168.1.254
![DXS 3600 How to Setup SNMP](/in/en/-/media/faqs/uk/dxs/dxs-3600-how-to-setup-snmp0005.png)
Click “Add” then “Save”
![DXS 3600 How to Setup SNMP](/in/en/-/media/faqs/uk/dxs/dxs-3600-how-to-setup-snmp0006.png)
D-View 7 will now search for the device that was added in Step 7 – “Discovering”
Step 9 – You should notice that the device added in Step 7 has been added to “Managed Devices”
![DXS 3600 How to Setup SNMP](/in/en/-/media/faqs/uk/dxs/dxs-3600-how-to-setup-snmp0007.png?h=415&w=640)
Step 10 – To manage and connect to the device – go to “Device View”
Monitor > Device View
![DXS 3600 How to Setup SNMP](/in/en/-/media/faqs/uk/dxs/dxs-3600-how-to-setup-snmp0009.png)
Click on the link – In our example the IP was: 192.168.1.250 – This should open another tab and you may login
![DXS 3600 How to Setup SNMP](/in/en/-/media/faqs/uk/dxs/dxs-3600-how-to-setup-snmp0010.png)
![DXS 3600 How to Setup SNMP](/in/en/-/media/faqs/uk/dxs/dxs-3600-how-to-setup-snmp0011.png)
- DXS-3600-32S – FW: 2.40.046
- D-View7 – Version: 1.0.3.9
Note: Please always check our website for updates for firmware
Before commencing this setup, please check the following for D-View7 compatibility:
http://dview.dlink.com/models.php
Step 1 – Login to DXS-3600-32S
![DXS 3600 How to Setup SNMP](/in/en/-/media/faqs/uk/dxs/dxs-3600-how-to-setup-snmp0001.png)
Step 2 – Enable SNMP Global Settings
DXS-3600-32S > Management > SNMP > SNMP Global Settings
![DXS 3600 How to Setup SNMP](/in/en/-/media/faqs/uk/dxs/dxs-3600-how-to-setup-snmp0012.png)
Select the “Trap Settings” then click “Apply”
Step 3 – Enable SNMP Linkchange Trap Settings
DXS-3600-32S > Management > SNMP > SNMP Linkchange Trap Settings
![DXS 3600 How to Setup SNMP](/in/en/-/media/faqs/uk/dxs/dxs-3600-how-to-setup-snmp0014.png)
Click “Apply”
![DXS 3600 How to Setup SNMP](/in/en/-/media/faqs/uk/dxs/dxs-3600-how-to-setup-snmp0015.png)
You should see the above ports and “Traps” are “Enabled” – This will also depend on what ports you want to enable
Step 4 – Save configuration
Save > Save Configuration
![DXS 3600 How to Setup SNMP](/in/en/-/media/faqs/uk/dxs/dxs-3600-how-to-setup-snmp0016.png)
![DXS 3600 How to Setup SNMP](/in/en/-/media/faqs/uk/dxs/dxs-3600-how-to-setup-snmp0017.png)
Click “Apply”
![DXS 3600 How to Setup SNMP](/in/en/-/media/faqs/uk/dxs/dxs-3600-how-to-setup-snmp0018.png)
Click “OK”
Step 5 – Login to D-View7
![DXS 3600 How to Setup SNMP](/in/en/-/media/faqs/uk/dxs/dxs-3600-how-to-setup-snmp0019.png)
Step 6 – Once you login, you may be presented with the following.
![DXS 3600 How to Setup SNMP](/in/en/-/media/faqs/uk/dxs/dxs-3600-how-to-setup-snmp0020.png)
Click “Later”
Step 7 – You should now be in “Dashboard” view – At the moment there will not be any “Managed Devices”
![DXS 3600 How to Setup SNMP](/in/en/-/media/faqs/uk/dxs/dxs-3600-how-to-setup-snmp0002.png)
To add a rule – Click on “Edit”
![DXS 3600 How to Setup SNMP](/in/en/-/media/faqs/uk/dxs/dxs-3600-how-to-setup-snmp0003.png)
![DXS 3600 How to Setup SNMP](/in/en/-/media/faqs/uk/dxs/dxs-3600-how-to-setup-snmp0004.png)
Click “Add Rule”
Step 8 – Enter the probe settings for the device – In our example we are using the DXS-3600-32S (IP: 192.168.1.250). Note: You may also include a wide coverage of the network, for example: 192.168.1.1 – 192.168.1.254
![DXS 3600 How to Setup SNMP](/in/en/-/media/faqs/uk/dxs/dxs-3600-how-to-setup-snmp0005.png)
Click “Add” then “Save”
![DXS 3600 How to Setup SNMP](/in/en/-/media/faqs/uk/dxs/dxs-3600-how-to-setup-snmp0006.png)
D-View 7 will now search for the device that was added in Step 7 – “Discovering”
Step 9 – You should notice that the device added in Step 7 has been added to “Managed Devices”
![DXS 3600 How to Setup SNMP](/in/en/-/media/faqs/uk/dxs/dxs-3600-how-to-setup-snmp0007.png?h=415&w=640)
Step 10 – To manage and connect to the device – go to “Device View”
Monitor > Device View
![DXS 3600 How to Setup SNMP](/in/en/-/media/faqs/uk/dxs/dxs-3600-how-to-setup-snmp0008.png)
![DXS 3600 How to Setup SNMP](/in/en/-/media/faqs/uk/dxs/dxs-3600-how-to-setup-snmp0009.png)
Click on the link – In our example the IP was: 192.168.1.250 – This should open another tab and you may login
![DXS 3600 How to Setup SNMP](/in/en/-/media/faqs/uk/dxs/dxs-3600-how-to-setup-snmp0010.png)
![DXS 3600 How to Setup SNMP](/in/en/-/media/faqs/uk/dxs/dxs-3600-how-to-setup-snmp0011.png)
These may also help:
- DHCP Relay with VLANs on DXS-3600 Series via CLI Read Answer
- $name Read Answer
- How to Change the Time and Date Zone Via CLI - DXS-3600-Series Read Answer