Dual-band Wi-Fi 7 (802.11be), BE3600 class (2×2 + 2×2), delivering lower latency and higher efficiency for multi-user traffic
802.3at PoE+ for easy single-cable installation, with a 2.5GbE uplink and PoE Out support for downstream devices
Each SSID to a dedicated VLAN for traffic segmentation, enabling simple separation of networks through policy-based control
Per-SSID captive portal support enables branded guest access, promotions, and flexible login workflow
The wall-plate design enables cable-free rooms while delivering both Wi-Fi and wired connectivity for IPTV, PCs, and IP phones
Centralized management through Nuclias Unity or Nuclias hardware/software controllers (DNH-1000, DNC-5000)

The DAP-E3620W delivers per-room Wi-Fi 7 for hospitality venues and student dormitories — where high-turnover, multi-device use demands reliable in-room coverage on every visit.



Learn more :

Learn more :

Learn more :

|
Category
|
Wall Plate |
|---|---|
|
Interfaces
|
1 x 2.5-Gigabit Ethernet PoE LAN port for Uplink 4 x Gigabit LAN port (downlink, one PoE out for PD device) |
|
Antenna type
|
2 x 2.4 GHz internal antennas 2 x 5 GHz internal antennas |
|
Antenna gain
|
2.4 GHz: 3 dBi 5 GHz: 3.3 dBi |
|
Maximum Output Power
|
2.4 GHz: 25 dBm 5 GHz: 25 dBm |
|
Data Signal Rate
|
2.4 GHz: Up to 688 Mbps 5 GHz: Up to 2882 Mbps |
|
IEEE Standard
|
IEEE 802.11be/ax/ac/n/g/b/a IEEE 802.3u/ab/bz IEEE 802.3at PoE |
|
Security Protocol
|
WPA/WPA2/WPA3™ Personal/Enterprise SSID broadcast disable MAC address access control WEP 64/128-bit Enhanced Open Internal RADIUS server |
|
Network Management
|
Web Nuclias Unity Nuclias hardware and software controller SNMP |
|
Power Supply
|
IEEE 802.3at PoE |
|
Max. Power Consumption
|
16 W, 23.05 W (including PoE output) |
|
Operating Temperature
|
0°C - 40°C (32°F - 104°F) |
|
Storage Temperature
|
-20°C to 65°C (-4°F to 149°F) |
|
Operating Humidity
|
10% to 90% |
|
Storage Humidity
|
5% - 95% |
|
Dimensions
|
160 x 86 x 29 mm |
|
Actual performances may vary due to settings, cabling, temperature, network configuration, interface, device compatibility, environmental and on-site conditions, and other similar factors. References to power capability, signal or processing speed, signal range or distance, data encryption, storage capacity, display properties, or other performance metrics are based on optimal conditions derived from industry standards and provided for informational purposes only. Specifications may be subject to change without prior notice. |
|